Tractor protection valve with double check (9 pages)
Summary of Contents for BENDIX PR-3
Page 1
™ Valve. The principle difference between the two (2) valves is the inclusion of the check valve components in the PR-3 reservoir control valve. See Figures 1 and 2. When this kit is used for the repair of a PR-4 pressure protection valve, pressure protection valve (Figure 2) items 2, 3, and 4 will not be used.
Page 2
When working in the engine compartment, certain all system pressure has been depleted. the engine should be shut off and the ignition key should be removed. Where circumstances ▲ Use only genuine Bendix brand replacement ® require that the engine be in operation, EXTREME parts, components, and kits.
Page 3
PR-3 reservoir control valve 4. (PR-3 reservoir control valve only) Build pressure up (Figure 1). and slowly exhaust air from the supply side of the PR-3 reservoir control valve. The gauge on the delivery side 4. Discard the retaining ring.