Panasonic H-37PA60H Service Manual page 45

address.
- Press the PROGRAMME UP/DOWN button to step up/down
through the page.
- Press the VOLUME UP/DOWN button to change the function values.
- Set the data of EEPROM(ADDRESS 0BAF) to 01.
- Press the OK button to memorize the data.
Push the Power switch(button) off/on the set(the remote control) to
turn the set off/on.
It can be made Hotel mode.
3. Exit command
- First, set the data of EEPROM(ADDRESS 0BAF) to 00.
Next, Push the Power switch(button) off/on the set(the remote
control) to turn the set off/on.
Then, it is no longer hotel mode.
4. Access command to the Hotel mode setup menu
- Prerequisite : It is conditions that the data of EEPROM(ADDRESS
0BAF) is 01.
In order to display the Hotel mode setup menu, please enter the
following command (within 2 second).
[[TV]:down + [REMOTE]:TV/AV(3 times)]
Then, the Hotel mode setup menu is displayed.
5. Explain the Hotel mode setup menu
45