Multiple System Setup; Cuemode - Shure PSM900 Manual

Wireless personal monitor system
Hide thumbs Also See for PSM900:
Table of Contents

Advertisement

CUEMODE

Enters CUEMODE (to exit, press enter and select EXIT CUEMODE)
DISPLAY
Change the display settings on the bodypack
CONTRAST
Sets display brightness to high, low, or medium.
LOCK PANEL
Locks all controls except power and volume. To unlock, press exit, select OFF, and press enter.
BATTERY
Displays the following: Hrs: Min Left, temperature, Status, Cycle Count, and Health.
RESTORE
Returns receiver to factory default settings.

Multiple System Setup

When setting up multiple systems, designate a single bodypack to scan for available frequencies and download them to all the
rack units.
The bodypack must be from the same frequency band as all the transmitters.
1.
Power on all the rack units. Turn off the RF. (This prevents them from interfering with the frequency scan.)
Note: Turn on all other wireless or digital devices as they would be during the performance or presentation (so the scan will detect and avoid any in­
terferance they generate).
2.
Use the bodypack to scan for a group by pressing and holding the scan button for two seconds. The bodypack dis­
plays the group and the number of available channels, and flashes SYNC NOW....
Important: Note the number of available channels. If you have more rack units than available channels, eliminate potential sources of interference
and try again, or call Shure Applications for assistance.
3.
Sync the bodypack with the first rack unit by aligning the IR windows and pressing sync.
4.
Press scan again on the bodypack to find the next available frequency.
5.
Sync the bodypack with the next rack unit.
6.
Repeat with all the rack units.
7.
Sync each performer's bodypack to its respective rack unit by aligning the IR windows and pressing snyc. DO NOT
press scan on the bodypacks.
8.
Turn on the RF on all rack units. The systems are ready to use.
CueMode
CueMode allows you to upload the name and frequency settings from multiple rack units and store them as a list on a single
bodypack. You can then, at any time, scroll through that list to hear the audio mix from each transmitter, just as each performer
does during a show.
Shure Incorporated
19/31

Advertisement

Table of Contents
loading

Table of Contents