Page 1
UTi720E/ UTi730E Professional Thermal Imager User Manual...
Page 2
Preface Dear user: Thank you for selecting the brand new UNI-T E Series Infrared Thermal Imaging Device. In order to use this product correctly, please read the full text of this manual carefully before using, especially the part about "Safety Precautions".
Professional Thermal Imager User Manual 1. Performance indicators UTi720E: Low temperature scale (-20℃~ 150℃) Mode High temperature scale (0℃~ 550℃ (manual selecting scale) Thermal imaging pixel 256*192(49152) IFOV 3.8mrad Focal length 3.2mm Sensitivity <50mK @25℃ Frame frequency <25Hz -10℃~550℃, room temperature of 25℃, and ±2℃/±2% to take the...
Page 5
Professional Thermal Imager User Manual Focusing mode Free Focus Digital zoom 2x,4x 5 points,3 rectangles,3 circles, and1 line (add up to 6) Temperature Sweep Automatic isothermal, proportional isothermal, downward isothermal, Vitta tool upward isothermal, interval isothermal, and manual isothermal Temperature display Center point temperature, and high/low temperature tracking Temperature measurement ℃(default)、℉、K...
Professional Thermal Imager User Manual 2. Structure Description Description The USB Type - C interface Photo browsing button Upper casing Back key Lower casing Right key SD card slot SET key Interface protection cover Down key LCD display Bracket fixed screw hole Start key Infrared thermal image window Lighting key...
Professional Thermal Imager User Manual 3. Display instructions Displayresolution: 640×480 Description Description Marking tool Automatic tracking of the minimum point Image mode Color temperature bar Swatches switch Upper limit of swatchesscale Temperature measuring tool Electric quantity Vitta tool Temperature of the measurement central point System setup Automatic tracking of the maximum point...
Professional Thermal Imager User Manual 5. Instruction of configuration menu Configuration options for main menu Main page of the thermal imaging device 1. Press “SET key” on the home page to display the main menu 2. Press“Left/right key” to select sub-menu 3.
Professional Thermal Imager User Manual 7. Image mode Press "SET key" to pop up the main menu, select "Image mode" by using"Left/right key", and then press "SET key" to enter the sub-menu options of image mode. You can make selection byusing left/right key.
Page 10
Professional Thermal Imager User Manual using "Left/right key". By using "Left/right key",select the analysis object type (including point temperature measurement, line temperature measurement, rectangle, and circle) and select the target (this function can be used only when the analysis object is added on the home page). Clear all and preset tools.
Press "SET key", the picture interfacesub-menu will appear, press "Left/right key" to select the photo message (for UTi720E, you can view the picture shooting time, modify time, emissivity, infrared resolution, ambient temperature, humidity, reflection distance and QR code, remarks and other...
Professional Thermal Imager User Manual information. For UTi730E, you can view the photo shooting time, modify time, emissivity, infrared resolution, QR code, remarks and other information), modify remarks (after adding remarks, you can view them in the photo message), state editing (it can be used for second editing of the marking tool, image mode, swatches switch, temperature measurement tool, vitta tool and other functions on the original picture, and the function is basically the same as the main page function), QR code (it can be added to the existing QR code for picture classification.
(℃/K/℉). For distance units, they cannot be changed. 13.3 Parameters UTi720E: After entering the first-level menu of the Settings page, select the "Parameter" option and press the "SET key" to enter the sub-menu of "Parameter". Select emissivity/ambient temperature/reflected temperature/relative humidity/object distance/Temperature scale through the "Up/Down key".
"Up/Down key". When selecting high temperature alarm/low temperature alarm, select high/low temperature alarm value by using"Up/Down key", press "SET key" to select, and set the required value by using"Up/Down key" (UTi720E: -20℃-550℃ optional, and UTi730E: -40℃~400℃ optional).
Professional Thermal Imager User Manual 13.5 QR CODE After entering the first-level menu on the Setting page, select "QR CODE"option and press "SET key"to enter the QR CODE sub-menu. Select different QR Codes by using"Up/Down key"and press "SET key" to enter the change page for QR CODE name /CODE. 13.6 Language After entering the first-level menu on the Setting page, select "Language"...
Professional Thermal Imager User Manual 13.7 Date and time After entering the first-level menu on the Setting page, select Date and Time and press"SET key"to enter the submenu of Date and Time. Press "SET key" to change the time system/date/time, and change the value by using "Up/Down key".
Professional Thermal Imager User Manual 13.11 Automatic Shutdown After entering the first-level menu on the Setting page, select "Automatic Shutdown" option, and select Off /5 /10 /20 /30 /45 /60 /90 by using"Up/Down key". 13.12 Factory reset After entering the first-level menu on the Settings page, select the option of "Factory reset" option, press "SET key", and the prompt "Shutdown and factory reset"...
Professional Thermal Imager User Manual 13.14 About After entering the first-level menu on the Settings page, select "About"option and press "SET key" to enter the sub-menu of "Product Information". Then you can view product model, infrared resolution, hardware version, system version, SN, SD capacity and other related product information. 14.
Professional Thermal Imager User Manual Please be sure to use the product according to the instructions, otherwise the product will not be free of warranty after damage. Do not use the instrument in inflammable, explosive, humid or corrosive environment. Do not continue to use the instrument when it is damaged, broken or corrected, which will cause wrong test results.