Page 1
UTi165A Professional Thermal Imager P/N:110401108897X...
Page 2
UTi165A User Manual UTi165A User Manual Preface Thank you for purchasing the new UTi165A thermal imager. In order to use this product safely and correctly, please read this manual thoroughly, especially the Safety Instructions part. After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference.
UTi165A User Manual UTi165A User Manual 1.Safety Instructions To ensure accurate measurement results, please read the instructions carefully. Please use this product in accordance with the user manual, otherwise the free warranty will be voided if the product is damaged.
UTi165A User Manual UTi165A User Manual 6.Operating Instructions 5. Menu Introduction 6.1 Temperature Unit Selection 1. Press the SET button to open the main menu. 2. Press the left/right button to select the option. 3. Press the SET button to enter the temperature unit submenu.
Page 6
UTi165A User Manual UTi165A User Manual To track center point: 1. Press the SET button to open the main menu. 1. Press the SET button to open the main menu. 2. Press the left/right button to select the option. 2. Press the left/right button to select the option.
Page 7
UTi165A User Manual UTi165A User Manual 6.5 Settings 6.5.2 Date & Time To set date & time: To enter Settings menu: 1. Select the Date & Time option (up/down button) in the settings menu. 1. Press the SET button to open the main menu.
Page 8
UTi165A User Manual UTi165A User Manual Note: Selecting correct emissivity is very important for accuracy of temperature 6.5.6 Temperature Bar measurement, as emissivity has a significant impact on the measured surface temperature. For emissivity values of common materials, please refer to the common emissivity table in the appendix.
Page 9
UTi165A User Manual UTi165A User Manual 6.5.10 Format SD Card 6.5.8 Device Information 165A To format SD card: To view the device information: 1. Select the Format SD option (up/down button) in the settings menu. 1. Select the Device Info option (up/down button) in the settings menu.
UTi165A User Manual UTi165A User Manual 7.USB Communication General parameters 1. Download and install the PC software (refer to UNI-T Documents Download Operation Guide). PC software 2. Connect the USB cable to the PC. Type-C USB interface Data transmission 3. Users can browse pictures and analyze data through the PC software.
Copper plate Gypsum 0.06 0.75 Dark aluminum 0.95 Paint Human skin 0.98 Rubber 0.95 Asphalt 0.96 Soil 0.93 PVC material 0.93 Note: This manual can be downloaded from the official website of Uni-Trend (refer to UNI-T Documents Download Operation Guide).