Table of Contents
Advertisement
en Basic operation
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.
Note: Observe the information about
detergents and care products.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 19
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.7 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Inicio/Pausa+Carga
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
13.8 Adding laundry
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 10.
Press Inicio/Pausa+Carga
1.
The appliance pauses.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Inicio/Pausa+Carga
5.
13.9 Cancelling the pro-
gramme
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 10.
Press Inicio/Pausa+Carga
1.
Open the appliance door.
2.
48
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse/Freshen Up pro-
gramme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 29
Remove the laundry → Page 48.
3.
13.10 Resuming the pro-
.
Set the Spin or Drain programme.
1.
Press Inicio/Pausa+Carga
2.
13.11 Unloading the laundry
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 10.
Open the appliance door.
1.
Remove the laundry.
2.
13.12 Switching off the appli-
.
Press
1.
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
.
.
gramme when the pro-
gramme status is Rinse
Hold
ance
.
.
Advertisement
Table of Contents
