Installing The Cisco Sfs 7008P Switch Into A Rack - Cisco SFS 7008P Installation And Configuration Manual

Installing the Cisco SFS 7008P Switch into a Rack

Figure 3
Fabric card in slot 10
Fabric card in slot 13
Fabric card in slot 14
Installing the Cisco SFS 7008P Switch into a Rack
This section describes how to install the Cisco SFS 7008P switch in an equipment rack. If you purchased
the custom Cisco SFS 7008P switch shelf, follow the directions in the Cisco SFS 7008 InfiniBand Server
Switch Hardware Installation Guide. To mount the Cisco SFS 7008P switch chassis in an
industry-standard rack, follow these steps:
Install a shelf for the chassis as shown in
Step 1
The shelf must support the weight of the chassis, which can be up to 106 pounds if all possible
components are installed.
Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note
6
LIM and Fabric Module Connections
Fabric card in slot 9
LIM card in slot 1
LIM card in slot 2
LIM card in slot 3
LIM card in slot 4
LIM card in slot 5
LIM card in slot 6
LIM card in slot 7
LIM card in slot 8
Figure 4, if you have not already done so.
78-17434-01 Rev. A0