Advertisement
INSTALLER'S GUIDE
NOTE: Illustrations may vary from the actual unit by cabinet and heater size.
INSTALLATION
1. Remove the upper access panel from
the fan coil unit.
3.Install the electronic-control into the space on the left
hand side and attach with screws provided in the kit.
5. Cover the upper access panel on the fan coil unit.
Page 2
2. Remove the cover plate from the fan coil opening
and save the screws for the next step. Install the
heater kit and secure the element plate with the
2 screws removed from the cover plate plus a 3rd
screw provided with the kit.
Figure 1
4. Connect the electric heaters to the air handler
using the Heater Kit Plug.Connect high voltage to
the circuit breaker lugs and ground lug per the
wiring schematic and air handler installation guide.
Figure 3
Figure 5
Figure 2
Figure 4
18-HB24D1-2A-EN
Advertisement
