Equipment Rack Specifications - Cisco CRS-1 Site Planning Manual

Equipment Rack Specifications

Table 3-2
Description
AC Input, single-phase
Input voltage
Line frequency
Input current
Equipment Rack Specifications
Cisco Systems has tested the Cisco CRS 8-slot LCC to Cisco internal mechanical design verification
testing and electrical design verification testing in a four-post seismic rated (zone 4) rack. Use this
information for planning only. Consult your Cisco account representative for additional details.
If you plan to install the chassis in your own four-post rack, make sure that the rack meets the
specifications summarized in
Table 3-3
8-Slot Line Card Chassis Specifications
Chassis Dimensions
Height
Width
Depth
Chassis Weight
Chassis shipping weight
Chassis with all cards and
power modules, no cosmetics
Chassis, fully loaded with line
cards and full cosmetics (front
cover, front grille, and so on)
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Site Planning Guide
3-4
8-Slot Line Card Chassis Component and Power Specifications—Modular
Configuration Power (continued)
Value
Single-phase 200 to 240 VAC (nominal)
(range 180 to 264 VAC)
50 to 60 Hz (nominal)
(range 47 to 63 Hz)
16 A International
20 A North America
Table 3-3.
8-Slot Line Card Chassis and Equipment Rack Specifications
38.5 in. (97.8 cm)
17.5 in. (44.5 cm)
18.9 in. (48.0 cm) mounting rail flange, outside to outside
36.6 in. (93.0 cm) without cosmetics
40.5 in. (102.9 cm) with full cosmetics
418.3 lb. (189.7 kg) chassis with shipping crate and pallet
330.8 lb. (138 kg) chassis with fans, PDUs, and blanks (as shipped)
600 lb. (272.2 kg)
650 lb. (294.8 kg)
Chapter 3 Technical and Environmental Specifications
OL-5802-09