Table of Contents
Advertisement
SPECIFICATIONS (D-R1SB)
Power requirement during operation
Power requirement at standby
Power supply
Mass
External dimension
Tuner
Antenna input/output terminal
Signal system
Laser
Format
Image recording system
Sound recording system
VIDEO input
VIDEO output
S-VIDEO input
S-VIDEO output
COMPONENT output (Y, P
, P
B
AUDIO input
AUDIO output
DIGITAL AUDIO output BITSTREAM/PCM (Optical
terminal)
DIGITAL AUDIO output BITSTREAM/PCM (Coaxial
terminal)
DV input
Remote control
Operating conditions
Clock display
Clock accuracy
• The design and specifications may change without prior notice.
• The Illustrations and screens described in this manual may be exaggerated or simplified for easy recognition and may be slightly different from the actual
unit.
Supplied Accessories
Remote control ........................................................................ 1
Batteries (R03) ......................................................................... 2
Power cord ............................................................................... 1
Coaxial cable ............................................................................ 1
Video/Audio cable ..................................................................... 1
OWNER'S MANUAL (INSTALLATION GUIDE) ....................... 1
OWNER'S MANUAL (OPERATIONS) ..................................... 1
Quick Reference ...................................................................... 1
31W
3.8W or below (Eco mode: off)
2.0W or below (Eco mode: on)
230-240V AC, 50/60 Hz
4.2kg
Width 430 x Height 78 x Depth 325mm
System :
Channel coverage : PAL I VHF : A-J, 11, 13, E2-E12
Stereo :
VHF/UHF : 75Ω, Coaxial Connector
Standard PAL Color TV system
Semiconductor laser, Wavelength : 650nm/780nm
DVD-VR format
DVD-Video format
MPEG2
Dolby digital, M1, M2, Linear PCM
1.0Vp-p (75Ω), Sync signal negative, Pin jack x 1 system, 1 in front, SCART socket x 2 at rear
1.0Vp-p (75Ω), Sync signal negative, Pin jack x 1 system, 1 at rear, SCART socket x 2 at rear
(Y) 1.0Vp-p (75Ω), Sync signal negative, (C) 0.286Vp-p (75Ω), 1 in front, Mini DIN4 Pin x 1 system
SCART socket x 1 at rear
(Y) 1.0Vp-p (75Ω), Sync signal negative, (C) 0.286Vp-p (75Ω), 1 at rear, Mini DIN4 Pin x 1 system
SCART socket x 1 at rear
)
Y output (green), 1.0Vp-p (75Ω), Sync signal negative, Pin jack x 1 system
R
P
, P
B
R
2.0V (rms), 50kΩ or below, pin jack (L, R) x 1 system 1 in front,
SCART socket x 2 at rear
2.0V (rms), 200Ω or above, pin jack (L, R) x 1 system 1 at rear,
SCART socket x 2 at rear
Optical connector x 1 system
0.5Vp-p (75Ω), pin jack x 1 system
4-pin x 1 in front
Wireless remote control (SE-R0106)
Temperature : 5°C ~ 35°C, Position: Horizontal
24 hour digital display
Quartz (monthly deviation : approximately ±30 seconds)
Frequency synthesizer
UHF :
E21-E69
CATV :
X, Y, Z, S1-S41, 1-53
(48MHz to 464MHz, 8MHz steps)
NICAM-I
output (blue, red), 0.7Vp-p (75Ω), Pin jack x 1 system each
Advertisement
Table of Contents
