Charging The Battery Pack - Sanyo au W22SA Basic Manual

Charging the Battery Pack

The battery pack is not fully charged at the time of purchase.
When you use the W22SA for the first time or when the battery level is low, charge the
battery pack with the dedicated charger.
How to Charge the Battery Pack
Connect the SANYO AC Adapter 03 to the Desktop Holder.
Check the pin configuration and orientation of the connector before
connecting the adapter.
Plug the power plug of the SANYO AC Adapter 03 into an AC outlet.
Attach the W22SA phone in which the battery pack is
installed to the Desktop Holder.
To detach, hold down the Desktop Holder and detach the W22SA phone.
AC outlet
• Incoming illuminator stays lit (red). → Charging in progress.
• The light goes off. → Charging completed.
Information
The battery pack can also be charged by directly inserting
the SANYO AC Adapter 03 connector into the external
connector on the W22SA phone.
10
The W22SA phone
with battery pack
attached
SANYO AC Adapter 03
Incoming illuminator
(light is red)
Desktop Holder
②
①