Charging The Battery Pack - Sanyo W64SA User Manual

Charging the Battery Pack

The battery pack is not fully charged at the time of purchase.
Charge the battery pack before using your W64SA for the first time.
How to Charge the Battery Pack
■
1
Connect the Common AC Adapter 01
holder.
Check the pin configuration and orientation of the connector
and connect it horizontally.
2
Plug the power plug of the Common AC Adapter 01
into an AC outlet.
3
Place the W64SA with the battery pack attached on
Desktop holder, as illustrated below.
Hold Desktop holder to detach the W64SA.
AC outlet
Common AC Adapter 02
(not included in the package)
• The cellphone beeps and the incoming illuminator lights red.
• The cellphone beeps and the incoming illuminator turns off.
Information
The battery pack can also be charged by
•
directly inserting the Common AC Adapter
01 02 connector (not included in the
／
package) into the external connector on the
W64SA.
Note that the actual figures may differ from the
•
illustrations depending on your AC adapter.
02 to Desktop
／
Desktop Holder
Charging is completed.
02
／
Incoming Illuminator
(Light is red.)
Charging is in progress.
①
②
11