Table of Contents
Advertisement
ENGLISH
CHARGING YOUR APPLIANCE
1.
Ensure the product is switched off.
2.
Connect the product to the USB cable and then connect the USB end of the cable to a
powered USB port.
3.
Charge for 2 hours when using for the first time. This first charge is important to the
shaver's battery life.
CHARGING INDICATOR LIGHTS
During charging
Lights
š
˜š
˜˜š
˜˜˜š
˜ = on š= flashing
Once fully charged, all 4 lights will stay on for 5 minutes and then go off.
Charge remaining
After use, when you switch off your shaver, the charging indicator lights show the remaining
charge for 5 seconds.
Lights
˜˜˜š
˜˜š
˜š
š
During use
The lights will illuminate backwards and forwards during use in a cycling pattern.
•
Your head shaver cannot be used when it is charging.
•
When empty, the battery should be charged for 2 hours for a full charge and will
provide up to 60 minutes of shaving time.
•
To preserve the life of the battery do not charge the battery after each use. The best
practice is to use the shaver until there is only a single light left flashing and then
recharge.
4
Charge level
0-25%
25-50%
50-75%
75-99%
Charge remaining
99-75%
75-50%
25-50%
25% or less
Advertisement
Table of Contents
