Loading Paper In The Cassette - Canon PIXMA iP4500 Quick Start Manual

Loading Paper in the Cassette

Some types and sizes of paper are not loadable in the Cassette and requires the use of the Rear
Tray. If you intend to use only the Cassette, check for any usage restrictions in advance.
Important
If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x
86.0 mm (credit card-size) for a trial print, it can cause paper jams.
Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper
to be jammed.
1
Pull out the Cassette from the printer and
remove the Cover (A) on the Cassette.
2
Adjust the size of the Cassette.
3
Load the paper into the Cassette with the
print side facing DOWN, aligning the paper
stack against the right side of the Cassette.
Do not load higher than the Load Limit Mark (A).
4
Slide the paper guides (B) to fit to the loaded
paper stack.
8 Loading Paper in the Cassette
(A)
(A)
(B)