Hitachi CP-RX94 User Manual page 53

Item
MY BUTTON
(continued on next page)
This item assigns one of the following functions to the ECO button
on the control panel (5) and MY BUTTON 1/2 on the remote
control (6).
(1) Choose a button to assign a function from ECO, MY BUTTON-1
and MY BUTTON-2. Use the ▲/▼ buttons to select the desired
function on the menu and press the ► button.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
functions to the chosen button. Press the ENTER or INPUT
button to save the setting.
• COMPUTER IN1: Selects the input from COMPUTER IN1 port.
• COMPUTER IN2: Selects the input from COMPUTER IN2 port.
• HDMI: Selects input from HDMI port.
• S-VIDEO: Selects the input from S-VIDEO port.
• VIDEO: Selects the input from VIDEO port.
• INFORMATION: Displays SYSTEM_INFORMATION,
INPUT_INFORMATION (56) or nothing.
• MY MEMORY: Loads one of adjustment data stored (33).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the
current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (29).
• FILTER RESET: Displays the filter time reset confirmation dialogue (55).
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (49) appear or disappear.
• AV MUTE: Turns the picture and audio on/off.
• RESOLUTION: Turns on/off the RESOLUTION dialog (40).
• ECO MODE: Changes the ECO MODE (41).
• BLANK: Turns on/off the blank function. (ECO button only)
• FREEZE: Turns on/off the freeze function. (ECO button only)
• VOLUME: Turns on/off the volume dialog. (ECO button only)
• AUTO: Performs the automatic adjustment function.
(ECO button only)
Description
OPTION menu
53