Turning.off.the.power - Hitachi CP-CX250 User Manual

Power on/off
Turning on the power (continued)
WARNING..►A.strong.light.is.emitted.when.the.projector's.power.is.on ..Do.
not.look.into.the.lens.of.the.projector.or.look.inside.of.the.projector.through.any.
of.the.projector's.openings .
►Do.not.touch.around.the.lamp.cover.and.the.exhaust.vent.during.use.or.just.
after.use,.since.it.is.too.hot .
Turning off the power
1 .
Press.STANDBY/ON.button.on.the.projector.or.on.the.remote.control .
The.message."Power.off?".will.appear.on.the.screen.for.about.5.seconds .
2 .
Press.the.STANDBY/ON.button.again.while.the.message.appears .
The.projector.lamp.will.go.off,.and.the.POWER.indicator.will.begin.blinking.
in.orange ..Then.the.POWER.indicator.will.stop.blinking.and.light.in.steady.
orange.when.the.lamp.cooling.is.complete.(73) .
3 .
Attach.the.lens.cover,.after.the.POWER.indicator.turns.in.steady.orange .
Do.not.turn.the.projector.on.for.about.10.minutes.or.more.after.turning.it.off ..
Also,.do.not.turn.the.projector.off.shortly.after.turning.it.on ..Such.operations.might.
cause.the.lamp.to.malfunction.or.shorten.the.lifetime.of.some.parts.including.the.lamp .
WARNING
during.use.or.just.after.use,.since.it.is.too.hot .
►Remove.the.power.cord.for.complete.separation ..The.power.outlet.should.be.
close.to.the.projector.and.easily.accessible .
NOTE
•.Turn.the.power.on/off.in.right.order ..Please.power.on.the.projector.
prior.to.the.connected.devices ..
•.This.projector.has.the.function.that.can.make.the.projector.automatically.turn.on/
off ..Please.refer.to.the.DIRECT.POWER.ON.(53).and.AUTO.POWER.OFF.(54).
items.of.the.OPTION.menu .
►Do.not.touch.around.the.lamp.cover.and.the.exhaust.vents.
19