X97; Fully Automatic Operations - Singer SISIL SWM-FA70R User Manual

operations
fully autoMatiC operations
HOW TO WASH AUTOMATICALLY
Before you start washing, check the following;
— Connect the water supply hose to the water tap. Leave the tap open. Plug the power cord in. Make sure
to lay down the drain hose.
WASHING FOR THE FIRST TIME
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:
1. Press the power button.
2. Open the detergent drawer and insert a little detergent.
3. Select relevant program.
4. Turn on the water supply to the washing machine.
5. Press the start/pause button.
SPECIAL NOTES!
automatic Weight balancing function
— After the power is on, a program is selected and the start /pause button is pressed. Then, the pulsator
starts to rotate without water for three cycles. This action balances the weight of the clothes in the
washing basket and this is not a machine defect. After this balancing process, water is supplies
automatically.
Detergent and Softener
— During the water inflow, it is possible to open the detergent box and add detergent. However, it is better
to press the start/pause button to stop the water supply and add detergent. Close the lid and press the
start/pause button again. This method is much more convenient.
— The fabric softener is required to be inserted manually into the softener dispenser after the first wash
cycle and it is automatically dispensed throughout the wash cycle.
— Use the correct detergent for the fabrics that you are washing
Put the laundry into the washer.
— Be careful not to overload with the laundry.
— If the lid is open while spinning, the washing machine is stopped automatically for safety (It does not
stop during the washing cycle). It displays an error message, if the lid is not closed properly after
opening.
— It is possible to control the washing time, rinsing cycle, and spinning time at every program during the
washing.
24