Agency Approvals; Fcc Part 68 Notice - Cisco SB 100 Series Regulatory Compliance And Safety Information Manual

Agency Approvals

Agency Approvals
Table 1
series routers.
Table 1
Safety Standards
UL 60950, CSA 60950
IEC, EN 60950:1992 with
Amendments A1 through A4 and
A11, AS/NZ5 3260
Table 2
Table 2
Telecom Standards
FCC part 68/TIA 968
CS-03, III, VIII
Directive 1999/5/EC, CTR3
JATE, NTT
TS013, TS031
PTC 231

FCC Part 68 Notice

This equipment complies with Part 68 of the FCC rules and the Technical Requirements for Connection
to the Telephone Network published by ACTA. On the bottom of the this equipment is a label that
contains, among other information, a product identifier in the format US:5B1MFNA0013. If requested,
this number must be provided to the telephone company.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. If advance notice is not practical, the
telephone company will notify the customer as soon as possible. Also, you will be advised of your right
to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operation, or procedures that
could affect the operation of this equipment. If this happens, the telephone company will provide
advance notice in order for you to make the necessary modifications to maintain uninterrupted service.
If you have trouble with this equipment, please contact Cisco Systems for repair and warranty
information. If the trouble is causing harm to the telephone network, the telephone company can request
that you remove the equipment from the network until the problem is resolved.
Normally, this equipment will be used in conjunction with FCC approved equipment that limits the
Encoded Analog Content that provides the required Billing Protection.
Cisco SB 100 series routers that bear the labeling identification number US:5BMFMAM0013 comply
with the following requirements:
•
Regulatory Compliance and Safety Information for Cisco SB 100 Series Routers
20
lists the safety and electromagnetic interference (EMI) standards that apply to the Cisco SB 100
Safety and EMI Standards for the Cisco SB 100 Series Routers
lists the agency approvals of telecom standards that apply to the Cisco SB 100 series routers.
Telecom Standards for the Cisco SB 100 Series Routers
FCC Rules and Regulations 47 CFR Part 68
EMI Standards
CFR47 part 15 subpart B, 2000 class B
EN55022, EN550: EN61000 series
78-16777-01