Adjusting The Audio Volume - Hauppauge WinTV-USB Installation And Reference Manual

ote: WinTV-USB has a high quality S-Video input jack. If
N
your VCR or camcroder uses a Composite video connecot
(this is often a yellow RCA jack) , use the supplied S-Video
to Composite video Adapter.
To connect the audio from your VCR or camcorder, use an 1/8" stereo minijack
extension cable (1/8" male minijacks on one end, and RCA onthe other end) and
connect the "Audio Output" RCA on the VCR or camcorder to the audio LineIn
jack on the WinTV-USB.
ote: If you need a female RCA to 1/8" minijack adapter, these
N
adapters can be found at most Radio Shack stores.

Adjusting the Audio Volume

If you are using bringing the audio from the WinTV-USB into your PC through
the "audio over USB" feature, or connecting to your Sound Card, the WinTV
application can change the audio volume coming from the WinTV-USB by
adjusting the LineInput sound volume of the Volume Control program
in Windows.
The Volume Control program is normally installed with Windows or by the
sound card installation program, and allows the control of volume from the vari-
ous sound sources. If you cannot hear sound when running the application,
check the volume level of LineInput in VolumeControl. The VolumeControl
application is started by either double clicking the speaker icon in
System tray (found normally in the lower right hand corner of your computer
screen), or clicking
Start/Programs/Accessories/Multimedia/VolumeControl
or
Start/Programs/Accessories/Entertainment/VolumeControl
WinTV-USB
Installation and Reference Manual
1-7