Download Print this page

Installation Overview - Hauppauge WinTV-HVR-1600 Kit Quick Installation Manual

Wintv media center kit

Advertisement

Installation overview

Step 1. Install the WinTV-HVR in your PC and connect the TV and A/V cables.
Step 2. After starting Windows, install the WinTV-HVR device driver from the
WinTV Installation CD-ROM.
Step 3. Install the Media Center remote control.
Step 4. Set up the TV tuner in the Media Center application.
Detailed installation instructions
Step 1: Install the WinTV-HVR board in your Media Center PC and
connect the cables
Turn the power off on your PC.
Install the WinTV-HVR-1600 into a
PCI slot. Install the WinTV-HVR-
1800 into a PCI Express x1 slot. On
some PC's, the WinTV needs to be
plugged into the first or second PCI
slot.
Plug your TV antenna or cable TV
cable into the TV Connector. Skip
to step 2.
If you are using a cable TV or
satellite TV set top box, connect
it to the WinTV-HVR through either S-
Video or Composite connector on the
WinTV board, or connect a coax
cable from the RF Out on your set
top box to the TV input on the
WinTV board. Media Center will auto-
matically detect which method you
are using to connect the WinTV to the
set top box.
Audio and video from an external A/V device (satellite TV receiver, cable TV box,
VCR, camcorder, camera, DVD player) can be brought into the WinTV-PVR via the
back panel connectors. If your A/V device uses S-Video, connect to the S-Video
input on the WinTV board. If your video device uses composite video instead of S-
Video, use the yellow RCA jack.
Audio input from an external A/V device can be brought into the WinTV board via
the white and red audio input jacks.
Step 2: Installing the WinTV-HVR Windows Vista driver
After installing the WinTV-HVR in your PC, boot Windows. The Found New
Hardware Wizard will appear. Insert the WinTV-PVR Installation CD-ROM
in your PC's CD-ROM drive.
In Windows XP, select No, not at this time and click Next.
Make sure Install the software automatically (Recommended) is
WinTV-HVR-1600
WinTV-HVR-1800
Board connectors
FM Radio Connector input
2
TV Connector
for Cable TV input
Digital TV Connector
for ATSC/QAM digital TV
S-Video input
Left audio input
Right audio input

Advertisement

loading

This manual is also suitable for:

Wintv-hvr-1800 kit