Maintenance; Cleaning - Hatco GRS-18 Installation And Operating Manual

MAINTENANCE

General
The Hatco Glo-Ray Heated Shelf units are designed
for maximum durability and performance with
minimum maintenance.
WARNING
ELECTRIC SHOCK HAZARD:
• Turn the power switch OFF, unplug the power
cord, and allow the unit to cool before
performing any maintenance or cleaning.
• DO NOT submerge or saturate with water.
Unit is not waterproof. Do not operate if unit
has been submerged or saturated with water.

Cleaning

To preserve the finish of the Glo-Ray Heated Shelf,
it is recommended that the surfaces be wiped daily
with a damp cloth. Stubborn stains may be removed
with a good stainless steel cleaner or a non-
abrasive cleaner. Hard to reach areas should be
cleaned with a small brush and mild soap.
NOTICE
Use non-abrasive cleaners only. Abrasive
cleaners could scratch the finish of the unit,
marring its appearance
susceptible to soil accumulation.
and making it
16
WARNING
This unit has no "user-serviceable" parts. If
service is required on this unit, contact an
Authorized Hatco Service Agent or contact the
Hatco Service Department at 800-558-0607 or
414-671-6350; fax 800-690-2966; or International
fax 414-671-3976.
Use only Genuine Hatco Replacement Parts
when service is required. Failure to use Genuine
Hatco Replacement Parts may subject operators
of the equipment to hazardous electrical
voltage, resulting in electrical shock or burn.
Genuine Hatco Replacement Parts are specified
to operate safely in the environments in which
they are used. Some aftermarket or generic
replacement parts
characteristics that will allow them to operate
safely in Hatco equipment.
do not have the
Form No. GRSM-0108