Service Adjustments [Option Setting] - Sanyo CE32WN4 Service Manual

SERVICE ADJUSTMENTS
[After replacing the Memory IC (IC803)]
The memory IC, IC803, stores the feature setting data of TV set and service adjustments data for each circuit,
therefore, when the memory IC is replaced, it should be programmed by following "OPTION SETTING" and
"SERVICE ADJUSTMENT".
To enter the Option Mode
+ Press and hold the F/OK button on the remote control and P
window will appear on the screen.
To set the option mode
+ Highlight the desired option item by using the P
+ To switch the option mode, use the Volume - (LEFT) or Volume + (RIGHT) button.
+ The data which is set in the option mode is stored into the memory IC automatically.
Following table shows the available option items and default setting mode.
Option Mode
ON-TIMER
Wel. Text
P&P
SORT MODE
Destination
3D Surround
2 step mute
AV3 mode
Exit from the Option Mode
+ Press the MENU button.
ON TIMER
Wel. TEXT
P&P
SORT MODE
Destination
3D Surround
2 step mute
AV3 mode
Mode
ON or OFF
ON or OFF
ON or OFF
Tuning
or Sorting
BG/DK
ON or OFF
ON or OFF
ON or OFF
button on the front panel of the TV. The option
ON
ON
ON
Tuning
BG/DK
ON
OFF
ON
or P button .
Description & Note
On-timer available, default "ON"
Display message when first set up, default "ON"
Plug & Play mode, default "ON"
Tuning mode, default "Tuning"
Destination option ,BG, BG/DK, SECAM, I-UK,
I-IRE, default "BG/DK"
3D Surround available, default "ON"
Mute mode option, default "OFF"
Front AV mode option, default "ON"
5
EB6-D chassis