Setting Up As Wired Range Extender (Access Point) - Linksys RE7000 User Manual

o
Spot nder results
Note —If you are not connected to your range extender's setup network you will get a
page alerting you that you haven't connected to the extender.
you are trying to set up a new range extender or access settings on a range extender you
already set up.
Sometimes you will get a "404 Not Found" error page. If that happens, clear your browser
cache and try again.
5. Connect your
If you have set up your range extender with a Linksys Max
to do anything. Max -Stream routers support seamless roaming, and your extended Wi
network shares the same net
main or extended network as you move around the coverage area.
If you do not have a router with seamless roaming, s
device's Wi -Fi manager. Extended networks are i
your main network name(s).
Setting up as
Browser -based setup
1. Prepare for setup
Be sure your router has a working Inter
long enough to connect the router to the range extender.
2. Plug the Linksys extender into a wall outlet.
Wi -Fi devices to the extended network you just created.
work name and password. Connected devices will select the
Passwords will be the same as those for your main network(s).
wired range extender (
-Stream router, you don't have
elect the extended network on your
denti ed by "_Ext" added to the end of
access point
net connection and you have an Ethernet cable
The page will ask whether
)
-Fi
14