Alamo Bush Hog HDC-3 Series Operator's Manual page 48

1#
1$
1%
w
ITEM DESCRIPTION
q
Engine Start/Stop Button
w
Key Code Buttons
e
OK to Start Indicator Light
r
PTO Indicator LED
t
Steering Lever Indicator LED
y
Parking Brake LED
u
Operator Position Indicator
i
Low Oil Indicator LED
o
Fuel Level Indicator LED
1)
PTO Switch
1!
LCD Display
1@
Head Light ON/OFF Switch
1#
Hour Meter Switch
1$
Tachometer / Voltage Switch
1%
Service Engine Indicator
HDC-3 ZT 05/19
© 2019 Alamo Group Inc.
CONTROLS
CONSOLE
i o u
1@ e
FUNCTION
Powers Engine ON / Powers Engine OFF.
Powers up Console by entering Key Code and enables specific functions
as starting /stopping engine, engaging PTO.
Glows Green when safe to start engine, Red when unsafe.
Glows Red to indicate PTO is engaged.
Glows Reds when Steering Levers are not in Neutral position during startup
Glows Red if Parking Brake not set during startup.
Glows Red if Operator is not in seat.
Alerts Operator when Engine oil is low.
Alerts Operator when Fuel is low.
Engages / Disengages Mower Blades.
Indicates Hours, Service Alerts, Engine RPM, and Voltage.
Turns Head Lights On and Off.
Total Accumulated Engine Hours.
Switch between Engine RPM or System Voltage.
Indicates engine Oil Change is needed. Press down and hold for 6-9 sec-
onds to reset after Oil Change.
Controls Section 3-2
1!
r
t y
q
1)
NOT
USED