ADC H2TU-C-202 User Manual page 19

LTPH-UM-1161-01
Press this key: To access this menu:
Monitor
M
P Performance
E Event Log
Config
C
Inventory
I
Report
O
Rlogon/Rlogout
R
Help
H
H2TU-C-202 List 3F
Table 4. Logon Screen Menus
Menu Functions
Monitors loopbacks and alarms, provides a graphical representation of circuit activity,
including ES, UAS, SES, and line code.
Provides performance and alarm histories for current, 25-hour, 48-hour, or 31-day
periods for either the DS1 or HDSL2 interface. Selecting this menu after a remote
logon will permit viewing of the H2TU-R Blockage Indicator (BI) History screen, as
displayed from the DS1 interface. See
page 33.
Identifies the 100 most recent system events and reports the date and time of
occurrence. Selecting this menu after a remote logon displays the Sectionalized Event
Log for the H2TU-R. See Figure 23 on page
Provides standard configuration options, ADC options, date and time setting, and a
reset option (factory settings). Also provides a master clear option that clears all
performance, alarm, and event log entries. Selecting the Config menu after a remote
logon will display the Signal Generator menu item, which provides access to the
Signal Generator configuration submenu (see
Provides product information about the various devices that are in the system and
lists circuit and device identifications.
Provides four types of reports: Full Report, Short Report, System Information Report,
and Event Report.
Remote logon can be performed from the H2TU-C or H2TU-R. The screen displays
Rlogout when the H2TU-C or H2TU-R is remotely logged on to the other unit at the
end of the circuit.
Remote logon from the H2TU-C will permit viewing of the H2TU-R Blockage Indicator
History screen, Sectionalized Event Log screen, and BERT Signal Generator
configuration submenu.
To log off from the remote unit, press
locally logged on until R is pressed again to reinitiate the remote logon.
Provides a glossary of terms used in the maintenance screens, a list of navigational
keys, aids for turn-up and printing, and ADC contact information.
June 28, 2002
Figure 11 on page 26 and Figure 17 on
38.
Figure 33 on page 60).
R
. Rlogout changes to Rlogon. The unit is now
Provisioning
11