Cycle Guide - Crosley CFWH4084GW Use & Care Manual

Cycle Guide

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings
that best fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
Not all cycles and options are available on all models.
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the washer drum with 3–4 items, not more
than ¼ full.
Medium load: Fill the washer drum up to about ½ full.
Items to wash
using default
cycle settings: Cycle:
Normally soiled Normal
cottons, linens,
sheets, and
mixed garment
loads
Sturdy colorfast Heavy
fabrics and Duty
heavily soiled
garments
Clothing, Sanitize
bedding and with Oxi
towels requiring
sanitization
Wet load of Drain &
clothes Spin
* All temperature selections feature a Cold rinse.
**Spin speed varies by model.
8
Wash Spin
Temperature*: Speed**:
Hot Fast
Warm Medium
Cool Off
Cold
Hot Fast
Warm Medium
Cool Slow
Cold Off
Hot Fast
Medium
Slow
Off
Fast
N/A
Medium
Slow
Off
Large load: Fill the washer drum up to about ¾ full.
Extra-large load: Fill the washer drum, but make
sure clothes can tumble freely. For best results, avoid
packing tightly.
Soil Available
Level: Options:
Heavy Extra Rinse
Normal Delay Wash
Light
Heavy
Extra Rinse
Normal Delay Wash
Light
Heavy Extra Rinse
Normal Delay Wash
Light
N/A Delay Wash
Cycle Details:
This cycle combines
medium-speed tumbling
and an extra-fast-speed
spin. This cycle is designed
to provide the most energy
efficiency.
Fast-speed tumbling and
an extra-fast-speed final
spin help provide optimal
cleaning and reduce
drying times.
This cycle eliminates 99.99%
of the most common bacteria
found in clothes, sheets,
and towels. Using the
highest wash temperature
available and adding a
powdered Oxi product in the
drum ensures sanitization.
Check recommended wash
temperature of your items
and use the amount of Oxi
recommended by
the manufacturer. Bacteria
tested were K. pneumonia, P.
aureginosa, and S. aureus.
Use Drain & Spin to remove
excess water from the load.
Spin speed can be set to a
slower setting.
Continued on next page