Cisco CRS-1 Series Quick Start Manual page 8

Setting Up the Required Management Services Without a Secure Connection
This section provides the procedures required to set up the required Management Services without SSL.
The Telnet server must be enabled before you can manage a router using certain CWI features. These features include
Note
the Telnet application, setting character displays in the Rack View application, and viewing committed configuration
changes using the Configuration Change dialog box. Refer to Chapter 4, "Bring Up a New Cisco CRS-1 Series Router,"
in the Cisco CRS-1 Series Carrier Routing System Getting Started Guide for information on enabling the Telnet server.
If you are connecting through a firewall in your network, the ports listed in Table 1 must be open before setting up the
Note
required Management Services. Refer to your firewall documentation for information on opening the ports. See the
"Network Considerations" section on page 3 for information on firewalls in a network.
To start the required Management Services on the router, perform the following steps:
Establish a Telnet/SSH session with the router.
Step 1
Step 2 Enter configuration mode.
RP/0/RP0/CPU0:router# configure terminal
Enable the HTTP server on the router.
Step 3
RP/0/RP0/CPU0:router(config)# http server
Enable the XML agent on the router.
Step 4
RP/0/RP0/CPU0:router(config)# xml agent corba
Exit configuration mode.
Step 5
RP/0/RP0/CPU0:router(config)# commit
Setting Up the Required Management Services with a Secure Connection
This section provides the procedures required to set up the Management Services with SSL encryption. When setting up the
required Management Services and the CWI client with a secure connection, the certification authority (CA) and router
certificates must be set up before enabling the HTTP server and CORBA agent.
The following procedures are provided:
• Setting Up the Certificates, page 9
• Enabling the Secure HTTP Server and CORBA Agent, page 10
Note The SSH server must be enabled before you can manage a router using certain CWI features. These features include the
SSH application, setting character displays in the Rack View application, and viewing committed configuration changes
using the Configuration Change dialog box. Refer to Chapter 4, "Bring Up a New Cisco CRS-1 Series Router," in the
Cisco CRS-1 Series Carrier Routing System Getting Started Guide for information on enabling the SSH server.
If you are connecting through a firewall in your network, the ports listed in Table 1 must be open before setting up the
Note
required Management Services. Refer to your firewall documentation for information on opening the ports. See the
"Network Considerations" section on page 3 for information on firewalls in a network.
8