Page 2
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 SUPPORT Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 INFORMATION Web site: www.blackbox.com • E-mail: info@blackbox.com...
SERVSHIELD TRADEMARKS USED IN THIS MANUAL Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Plexiglas ® is a registered trademark of Rohm & Haas Company. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
SERVSHIELD SERVSHIELD 2. Introduction 2.1 Description The ServShield protects your computer hardware in manufacturing environments and other industrial areas subject to harsh conditions. The cabinet is constructed of steel and it holds 600 lb. (272 kg)of equipment. The cabinet is preassembled, so it’s easy to set up and use.
SERVSHIELD SERVSHIELD 3. Installation 3.1 Leveling the Cabinet ServShield cabinets are shipped with both casters and leveling glides for your convenience. Two casters have brakes that you can activate by turning the brake level on the side of the wheel. You can lower the leveling legs by turning the leveling glide to the proper height using a ⁄...
Page 9
SERVSHIELD Fan Assembly (RF207) Fan Grill (3) Rear Door Fan Filter Cover #8-32 x ⁄ " self-drilling and tapping screws (12) Figure 3-1. Replacing a Rear Door Fan Filter.
SERVSHIELD SERVSHIELD 3.4 Front Door Filter You can easily remove the filter on the front door to clean or replace it. The part number for the front door filter is RM476. To remove the filter, remove the two wing nuts on the top of the filter, swing the filter bracket down and remove the filter.
SERVSHIELD 3.5 Mounting Rails Two pairs of vertical M6 steel mounting rails are in the top and bottom of the ServShield enclosure. The upper rails have 14U (24.5") of rack mounting space and the bottom rails have 17U (29.75") in the front and 23U (40.25 cm) in the rear of rack mounting space.