Bush Hog HT417 Operator's Manual page 37

ASSEMBLY
STEP "G"
Attach the central guard 1 to drawbar 2 using
screws 3. washers 4, plate 5 and nut 6.
In this step, you will use:
Item 3, 2 screws M10x120 (0.39"x4.72")
Item 4, 2 washers ø10.5 (ø0.41")
Item 5, 2 plate
Item 6, 2 nuts M10
STEP "H"
Secure the caps support 1 to the body with screws
2, washers 3, and nuts 4.
Attach to a distance of 11.22"-285mm.
Attach the protections 5 (DX-SX) to support 1 with
the screws 8, washers 9, and nuts 10.
Attach the protection 5 (DX-SX) to the box with
screws 6, and washers 7.
In this step, you will use:
Item 2, 4 screws M12x110 (0.47"x4.33")
Item 3, 8 washers ø13 (ø0.51")
Item 4, 4 nuts M12 (0.47"
Item 6, 4 screws M12x60 (0.47"x2.36")
Item 7. 4 spring washer ø13 (ø0.51")
Item 8, 4 screws M10x55 (0.39"x2.16")
Item 9, washers ø10 (ø.0.39")
Item 10, 4 nuts M10 (ø0.39")
Item 11, 2 grease nipples M10
HT417/HT417H 05/22 Assembly Section 3-9
© 2022 Alamo Group Inc.