Bush Hog HT417 Operator's Manual page 34

ASSEMBLY
STEP "B"
Attach drawbar 1 to the machine body 2 with pin 3
into the holes 5 of the machine body 2 and drawbar
1 (passing pin 3 through hole 4 of the machine body
2). Fasten pin 3 with bushing 6 and split pins 7.
In this step, you will use:
Item 6, 2 bushing ø20,5/30x12 (ø0.8"/1.2"x0.47")
Item 7, 2 split pins ø5x40 (ø0.2"x1.57")
STEP "C"
Attach grease fitting 1 to the pin and fork of the
crank assembly 2. Insert the pin of the crank
assembly 2 into its seat in drawbar 3, inserting the
spacers 4. Fasten in place with split pin 5. Fasten
the fork of the crank assembly 2 at the hole 6 using
pin 7 and split pins 5.
In this step you will use:
Item 1, 3 grease nipples M6
Item 4, 2 shims ø30.5x39.8x1(ø1.2" x 1.57" x 0.04")
Item 5, 3 split pins ø5x40 (ø0.2"x1.57")
Item 7, 1 pin ø20x66 (ø079"x2.6")
HT417/HT417H 05/22 Assembly Section 3-6
© 2022 Alamo Group Inc.