Stop - Delta Electronics MVF2000 Series Product Manual

Input the speed setting through DCS digital signal;
Communication:
Input the speed setting through communication;
PID:
Input PID Reference value;
2, Send start command
HMI:
Press
Digital:
Start the equipment through DCS digital signal.
Communication:
Input the speed setting through communication;

5-3 Stop

The routine stop modes comprise decelerated stop and free stop.

Free stop: The MVD stops outputting voltage, and the motor rotates freely and
decelerates gradually through the load and friction until it stops.

Stop (decelerated): the MVD stops according to the preset deceleration time.
For the setting of decelerated stop time, see Chapter IV-Description of functional
parameters.
to start the MVD.
Caution!

It shall be fully considered according to the operation condition
whether the motor is allowed to stop freely.

During free stop, voltage may still exist in the output cables due
to the back EMF generated by the motor.
77