Warranty Information; Returning Warranty Cards; Warranty; Returning Warranty Parts - ADC AD-210 Installation Manual

Phase 7 / 650,000 btu/hr with tilting options
Table of Contents

Advertisement

A. RETURNING WARRANTY CARDS
1. Before any dryer leaves the ADC factory test area, a warranty card is placed on the back side of the main door
glass. These warranty cards are intended to serve the customer where we record the individual installation date
and warranty information to better serve you should you file a warranty claim.
a. If a warranty card did not come with your dryer, contact the ADC Warranty Department or the ADC Service
Department at +1 (269) 923-3000.
IMPORTANT: A separate warranty card must be completed and returned for each individual dryer.
NOTE: Be sure to include the installation date when returning the warranty card(s).
B. WARRANTY
For a copy of the ADC commercial warranty covering your particular dryer(s), contact the ADC reseller from whom
you purchased the equipment and request a dryer warranty form. If the reseller cannot be contacted or is unknown,
warranty information can be obtained from the factory by contacting the ADC Warranty Department at +1 (269)
923-3000.
NOTE: Whenever contacting the ADC factory for warranty information, be sure to have the dryer's
model number and serial number available, so that your inquiry can be handled in an
expeditious manner.
C. RETURNING WARRANTY PARTS
ALL dryer or parts warranty claims or inquires should be addressed to the ADC Warranty Parts Department. To
expedite processing, the following procedures must be followed:
1. No parts are to be returned to ADC without prior written authorization ("Return Material Authorization" [R.M.A.])
from the factory.
NOTE: An R.M.A. is valid for only thirty (30) days from date of issue.
a. The R.M.A. issued by the factory, as well as any other correspondence pertaining to the returned part(s),
must be included inside the package with the failed merchandise.
113550 - 5
SECTION V

WARRANTY INFORMATION

www.adclaundry.com
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ml-210

Table of Contents