Environmental Protection; Maintenance - Ryobi RID1801M Original Instructions Manual

Hide thumbs

page of 60

/ 60
Bookmarks

Available languages

WARNING

Read all safety warnings and all instructions. Failure

to follow the warnings and instructions may result in

electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future

reference.

IMPACT DRIVER SAFETY WARNINGS

■

Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a

"live" wire may make exposed metal parts of the power

tool "live" and could give the operator an electric shock.

■

Make sure that the tool is only connected to the

voltage marked on the name plate.

■

Never use the tool if its cover or any bolts are

missing. If the cover or bolts have been removed,

replace them prior to use. Maintain all parts in good

working order.

■

Always secure tools when working in elevated

positions.

■

Never touch the blade, drill bit, grinding wheel or

other moving parts during use.

■

Never start a tool when its rotating component is in

contact with the work piece.

■

Never lay a tool down before its moving parts have

come to a complete stop.

■

The use of accessories or attachments other than

those recommended in this manual might present

a hazard.

■

When servicing use only identical replacement

parts.

■

Wear ear protectors. Exposure to noise can cause

hearing loss.

INTENDED USE

You may use this product for fastening / removing screws

and bolts.

CAUTION

The impact driver is not designed to be used as a drill.

MAINTENANCE

■

When servicing, use only identical Ryobi replacement

parts. Use of any other parts may create a hazard or

cause product damage.

■

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types

of commercial solvents and may be damaged by their

use. Use clean cloths to remove dirt, dust, oil, grease,

etc.

■

Always wear safety goggles or safety glasses with side

shields during power product operation or when blowing

dust. If operation is dusty, also wear a dust mask.

■

To avoid serious personal injury, always remove

the battery pack from the product when cleaning or

performing any maintenance.