5
6.1.1 How to Enter the Service Factory Mode
System standby
Confirm that both the Plasma Display and the Media Receiver are turned on and
a system cable is connected properly.
Perform the following operations within 3
seconds using the remote control unit.
• Press the "MENU" key.
• Press the "ENTER" key.
• Press the "0" key.
Service Factory Mode
Page 1/18
General information about the Plasma Display and Media Receiver
Page 2/18 to 9/18
Adjustment and setting items of the Media Receiver
Page 12/18 to 13/18
Adjustment and setting items of the Plasma Display
Note 1: If the remote control unit for adjustment with the factory (AA5F) code is used.
5
6
Press the "
Press the "Factory" key (Note 1)
Image receiving
Press the "Factory" key (Note 1)
Note: The actual page structure may be different.
PDP-503PU
6
7
(POWER)" key (POWER OFF)
Switch pages
with "5" and "∞" keys.
7
8
A
B
C
D
E
F
59
8