Installing On A Table; Mounting On A Wall - Cisco 860 Series Hardware Installation Manual

Chapter 2 Installing the Router
Figure 2-3

Installing on a Table

To install the router on a table or other flat horizontal surface, firmly place the router on a table or other
horizontal surface. Keep at least 1 inch (2.5 centimeters) of clear space beside the cooling inlet and
exhaust vents.
Connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the
"Installing the Router Ground Connection" section on page

Mounting on a Wall

The Cisco 860 series, 880 series, and 890 series ISRs have mounting holes on the bottom of the chassis
for mounting the unit on a wall or other vertical surface.
The mounting holes are bidirectional. You can hang the router with the front bezel facing upward or
downward.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-07
Antennas Oriented Vertically Down
Installing the Router
2-11.
2-7