Items Shipped With Your Router; Additional Items - Cisco 860 Series Hardware Installation Manual

Equipment, Tools, and Connections

Items Shipped with your Router

Unpack the box and verify that all items listed on the invoice were shipped with the router.
Table 2-1
Table 2-1
Item
Straight-through RJ-45 Ethernet cable
ADSL RJ-11-to-RJ-11 straight-through cable
RJ-11 DSL
DSL RJ-45-to-dual-RJ-11 breakout cable
RJ-45-to-DB-9 console cable
External 12 VDC power supply adapter
AC power supply cable with cable retention clip
Cisco Configuration Professional (Cisco CP) CD
1. By default, no cables are shipped with Cisco 860VAE models unless requested through the dynamic configuration tool.
2. DSL = digital subscriber line.
3. Shipped with Cisco 867 models only.
4. Shipped with Cisco 886, 887, 887M, and 886-J models only.
5. Shipped with Cisco 888E models only.
6. Cisco CP is optional by order and available only on some SKUs.

Additional Items

The following items are not shipped with the router but are required for installation:
•
•
•
•
•
•
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
2-2
lists the items and their quantities that are shipped with each router model.
Items and Their Quantities That Are Shipped with the Cisco 860 Series, Cisco 880 Series, and
Cisco 890 Series ISRs
2
cable
ESD-preventive cord and wrist strap.
Screws for mounting the router on a wall:
Two number-10 wood screws (round- or pan-head) with number-10 washers, or two number-10
–
washer-head screws, for mounting on a wall stud. The screws must be long enough to penetrate
at least 3/4 in. (20 mm) into the supporting wood or metal wall stud.
Two number-10 wall anchors with washers, for mounting the router on a hollow-wall.
–
Wire crimper for chassis grounding.
Wire for connecting the chassis to an earth ground:
2
AWG 14 (2 mm ) or larger wire for NEC-compliant chassis grounding.
–
2
AWG 18 (1 mm ) or larger wire for EN/IEC 60950–compliant chassis grounding.
–
A ring terminal with an inner diameter of 1/4 in. (5 to 7 mm), for NEC-compliant chassis grounding.
Ethernet cables for connecting to the Fast Ethernet (FE) WAN and LAN ports.
Chapter 2
Cisco
Cisco 860 860VAE
Series Series
1
Routers Routers
1 —
— —
3
1 n/a
— n/a
1 —
1 1
1 1
6
1 1
Installing the Router
Cisco 880 Cisco 890
Series Series
Routers Routers
1 1
— —
4
1 1
5
1 —
1 1
1 1
1 1
1 1
OL-16193-07