Bosch MXH180B Operating/Safety Instructions Manual page 10

The variable speed control settings are
marked on the speed control dial. The
settings for approximate /min (OPM) are:
Switch Setting
1
2
3
4
5
6
Slide charged battery pack into the housing
until the battery pack locks into position.
Your tool is equipped with a secondary locking
latch to prevent the battery pack from
completely falling out of the handle, should it
become loose due to vibration.
Speed Range
/min (OPM)
8,000
10,400
12,800
15,200
17,600
20,000
INSERTING AND RELEASING BATTERy PACK
You can refer to the charts on next page to
determine the proper speed, based on the
material and accessory being used. These
charts enable you to select both the correct
accessory and the optimum speed at a glance.
To remove the battery pack, press the battery
pack release button and slide the battery pack
forward (Fig. 1).
Press the battery pack release button again
and slide the battery pack completely out of
tool housing.
-10-