Show Scan Driver Revision; Show Software Revision; Show Data Format; Resetting The Standard Product Defaults - Hand Held Products 4600g User Manual

Show Scan Driver Revision

Scan the barcode below to output the scan driver revision. The scan driver
controls image capture.
You may use the Show Scan Driver Revision option if you have firmware with a
base number of 31205480. Refer to the

Show Software Revision

below for
information on determining the firmware revision in your unit.
Show Scan Driver Revision
Show Software Revision
Scan the barcode below to output the current software revision, unit serial
number, and other product information.
Show Software Revision

Show Data Format

Scan the barcode below to show current data format settings.
Data Format Settings

Resetting the Standard Product Defaults

If you aren't sure what programming options are in your imager, or you've
changed some options and want the standard product default settings restored,
scan the Standard Product Default Settings barcode below.
Standard Product Default Settings
The Menu Commands starting on page 12-5 lists the standard product default
settings for each of the commands (indicated by an asterisk (*) on the
programming pages).
11 - 2 4600rp, 4600g/4600r, 4800i User's Guide