Motorola MOTO BUDS 270 ANC User Manual page 8

Battery low warning
If you hear 'LOW BATTERY' every 3 minutes, recharge the battery.
Earbuds
Put the earbuds into the charging case. Charging starts automatically. The red
LEDs on both earbuds turn on until charging is complete.
Connecting your earbuds
Pair your earbuds with the Bluetooth device for the first time
1. Open the charging case top lid to turn earbuds on.
•
You will hear 'POWER ON'. The LEDs on both earbuds will flash blue for
a second and you will hear 'LEFT CHANNEL', 'RIGHT CHANNEL'.
•
Then the LED indicator flashes every 5 seconds on the left earbud and
red and blue alternately on the right earbud. Earbuds enter pairing
mode. You will hear 'PAIRING'.
2. Make sure the Bluetooth function of you device is activated. Earbuds will
do pairing automatically.
3. Select MOTO BUDS 270 ANC from the Bluetooth menu of your device. You
will hear 'HELLO MOTO, CONNECTED' when pairing is successfu
LED on both earbuds will flash slowly.
Note
Make sure your device is compatible with Bluetooth and earbuds.
Your MOTO BUDS 270 ANC are now ready for use.
8
Fig. 2b
Fig. 3a
The blue
l.
MOTO BUDS 270 ANC
Fig. 3b
Getting started