Table of Contents
Advertisement
•
Place heat diffusers over tube burners and the heat diffuser for sear burner over sear burner by inserting tabs into slots
13
in front of firebox. Opposite ends of heat diffusers rest on pins in back of firebox.
•
Place cooking grates onto grate rests.
14
•
Insert ends of Warming Rack pivot wire into holes in sides of gril lid. Insert ends of Warming Rack leg wire into holes in
sides of firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are
on top, Warming Rack is installed upside-down.
•
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto
ignitor.
Warming Rack Wires
Pivot Wire
(front-to-back)
(side to side)
Leg Wire
(side to side)
26 • 466226914
Heat Diffuser
(Black)
Pivot Wire
Heat Diffuser,
F/Sear Burner
(Stainless Steel)
Sear Burner
AA Battery
Pin
Warming Rack
Leg Wire
Cooking Grate
+
–
Advertisement
Table of Contents
