Checking Your Microwave; Setting The Child Lock - Kenwood K23MSW16E Instruction Manual

checking your microwave

Check your microwave after unpacking.
For your safety, the microwave stops
if the door is opened during cooking.
1. Pull handle to open the door.
Put the turntable ring inside the oven and place the glass
turntable on top of the ring. The turntable is shaped to sit
securely on the spindle.
You must always use the glass turntable and turntable ring
whenever you use the microwave.
Place a cup of water on the glass turntable. Make sure the
cup is microwave-safe - it should not have any decorative
metal trim.
2. Close the oven door.
3. Press the Start/+30s/Confirm (1) button to start a simple
30-second microwave cooking cycle and that allows you to
check the operation of the microwave.
4. When the cooking cycle has finished, the water should be hot
(be careful when you take the cup out of the microwave).
5. Press the Stop/Clear (2) button to stop the cooking and
press the Stop/Clear (2) button again to clear any settings.

setting the child lock

This feature prevents the electronic operation of the microwave
by locking the operation of the control panel until you have
cancelled it.
Please follow the steps below to set the child lock.
1. Press the Stop/Clear (2) button for 3 seconds; the unit will
beep. The child lock indicator will illuminate on the LED
display to indicate the microwave has set the child lock.
2. To release the child lock, press the Stop/Clear (2) button
again for 3 seconds; the unit will beep. The child lock
indicator will disappear from the LED display to indicate that
the microwave has released the child lock.
Low
M.Low
Med
M.High
High
2
Stop/Clear Start/+30s/Confirm
GB
1
37