Checking Your Microwave - Kenwood K23MFW15 Instruction Manual

checking your microwave

Check your microwave after unpacking.
For your safety, the microwave
stops if the door is opened during
cooking. Close the door and press the
START/+30SEC/CONFIRM (2) button
to continue the cooking cycle.
1. Pull the handle to open the door.
2. Place a cup of water on the plate. Make sure
the cup is microwave-safe (it should not have
any decorative metal trim).
3. Close the door.
4. Press the STOP/CLEAR (1) button to clear
any settings that have already been made.
5. Press the START/+30SEC/CONFIRM (2)
button to start a simple 30-second microwave
cooking cycle that allows you to check the
operation of the microwave.
6. When the cooking cycle has finished, the
water should be hot (be careful when you
take the cup out of the microwave).
7. Press the STOP/CLEAR (1) button to clear
any settings.
1
2
17