Advertisement
Wiring
Figure 4: Wiring instructions
- Connect the door lock on the ACL870FL-PB relay
- The reader and the remote relay unit ACL870FL-PB should be connected with 4 wires: +, -, A and B (RS485). Max. 50 m.
Pairing reader with remote relay
Figure 5: Wiring instructions
1. Close the jumper. ACL870FL-PB beeps continuously and the red led blinks.
2. Open the jumper
3. Wait for beep + OK beep (short + short + long beep)
After the OK beep, the coupling is done.
P/N 1073517A• REV 01.01 • ISS 27AUG18
3 / 4
Advertisement
