IBT Technologies IB791 User Manual page 40

BIOS SETUP
AGP Master 1 WS Read
By default, the AGP busmastering device waits for at least 2 wait states
before it starts a write transaction. When enable, this option sets the delay
to 1 wait state.
CPU & PCI Bus Control
The fields related to CPU & PCI Bus Control and their respective default
settings include CPU to PCI Write Buffer (Enabled), PCI Master 0 WS
Write (Enabled) and PCI Delay Transaction (Disabled).
CPU to PCI Write Buffer
This controls the CPU write buffer to the PCI bus.
PCI Master 0 WS Write
This determines whether the chipset inserts a delay before any writes from
the PCI bus.
PCI Delay Transaction
This is used to meet the latency of PCI cycles to and from the ISA bus.
Power-Supply Type
The field selects the power supply type to AT or ATX that is used by the
system. The default setting is AT.
VGA Share Memory Size
The field sets memory size that can be shared as VGA memory. The
default setting is 32M.
Select Display Device
The field selects the display device or devices that the system users. The
default setting is CRT+LCD.
Panel Type
This field sets the panel type that is supported by the system. Below are
the selections for the different panel types:
Note: Dithering Enable is for 18 bits panel and Disable is for 24 bits panel.
36
Panel Type
640x480, 1Ch, 18Bit
800x600, 1Ch, 18Bit
1024x768, 1Ch, 18Bit
1024x768, 1Ch, 24Bit
IB791 User' s Manual