3
Installing the Pulley
Assembly and Belt
Parts needed for this procedure:
1
Pulley assembly
Pulley-plate mount—for machines with an aluminum
1
spindle only
Flange nut (3/8 inch)—for machines with an aluminum
3
spindle only
For Machines with an Aluminum
Spindle
1.
Remove the top nut, washer, and sheave from
the spindle
(Figure
Note:
Note the orientation of the sheave when
you remove it from the spindle to ensure that
you install it properly later in the process.
1. Top nut
2. Washer
7).
Figure 7
3. Sheave
4. Spindle
2.
Insert the pulley-plate mount studs into the holes
in the sheave
1. Sheave
g302393
6
(Figure
8).
Figure 8
2. Pulley-plate mount studs
g302390