Maintenance - Telmann TEL35D User Manual

Maintenance

Wall Mounting Instructions
Cleaning the Lint Filter
Unplug the power cord prior to any cleaning. The lint
filter must be cleaned before and after each use.
Never use the dryer without the filter in place.
1. Removing the Filters
Insert fingers into the four holes around the exhaust
vent shroud and pull out to remove. The filter is in 3
parts: Exhaust vent shroud, lint filter and exhaust
filter (as shown in figure 1).
2. Cleaning the filter
Separate the filters from the shroud and remove the
lint with a soft brush or vacuum cleaner. Take care
not to damage the filters. (See fig 2).
3. Re-installing the Filter
Reinstall in the reverse order, align the recess in the
centre of the filters with the spigot in the centre of the
drum and ensure that it is fitted firmly. (as shown in
figure 3).
Note: The filter fixed in the bottom of the
drum should also be cleaned with a soft
brush.
7