Installation Instructions; Wall Mounting Instructions - Telmann TEL35D User Manual

Installation Instructions

Where to place your dryer
Place the dryer in a dry, well ventilated area, away
from heat and direct sunlight.
If the dryer is not wall mounted, it must be placed on
a firm level surface. Do not place the dryer on carpet
as this will block the intake. There should be at least
100mm between the dryer and the walls.
Fit the legs that come with the dryer to ensure
stability.
Leg
If the dryer is permanently mounted, at least
100mm between the dryer and walls is required.

Wall Mounting Instructions

1. Determine the location of the dryer on the
wall and mark the bracket position.
* A minimum 50mm is needed between the top of the
dryer and the ceiling for ease of installation.
* If mounting above a washing machine, allow
sufficient room to open the lid of the washer.
Tools Required
For Plaster/ Drill & 3mm Bit
Wooden Wall
Philips Head Screw Driver
Wood Screws, 1 2g x 50mm
Timber Screws
Wall Mounting Instructions
Wall Mounting Kit Includes
Description
2. Fix the wall hanging brackets to the wall securely
(eg. into the stud.) If the studs are too far apart fit a
timber slat to the studs then mount the brackets
onto the slat. The distance between each bracket is
155mm as per diagram.
3. To install the hook to the dryer, remove screws 1,
2, 3 & 4 as indicated in Fig. 2.
4. Align bracket as shown in Fig. 3 and refit
screws tightly.
5. Remove lower side screws and install the
spacers provided as per Fig. 2.
6. Install exhaust duct: for upwards discharge, join
sections 1 and 3, for downwards discharge, join
sections 1, 2, 2 & 3 as per Fig. 4.
1
7. With assistance, mount dryer on wall brackets.
1
See Fig. 5.
4
6
Wall Hanging Brackets
Hook
Plastic Spacers
Exhaust Duct
2
1
2
4 pieces