Safety Precautions - Haier HWM70-10A User Manual

Safety precautions

Please plug the power plug on special
receptacle. Be sure to use three-pins
power receptacle. Ensure that the earthing
prong of the power receptacle is earthed
reliably. Use leakage protector if possible.
Do not bend, stretch, twist, bind the power cord by force,
or reform it. Do not press or clamp it with heavy items. If the
power cord and power plug are bad, or the receptacle is loose,
be sure to have it replaced by the technicians of our special shop
or our agent, or the after-sales service department for the sake
of avoiding any risk. Keep the prong of the power plug clean.
If dust is found on the power plug, please wipe it off with dry cloth.
In case the washing machine is installed on ground with
carpet, do not block the ventilation hole with carpet.
Soft object
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do not let the machine share one receptacle with other electric
appliances. If the power plug plugging into the receptacle is
loose, do not use the plug any more.
Earth
T h e v e n t i l a t i o n
holes at the bottom
Before Using
Before Using
In normal usage of the washing machine,
the power plug shall be ready to be pulled
or plugged with hand. Be sure to pull the
plug off and close the water faucet in
following cases: power failure, delivering
the machine, setting the machine idle or
cleaning the machine. Do not plug
or pull the power plug with wet hand.
Do not use water hotter than 50 C .
Do not wash water-proof laundries like the raincoat,
bike covers etc. to avoid abnormal vibrations in spinning.