The Front And Rear Shock Absorber Assemblies - Yamaha VIKING 2021 Owner's Manual

To close
Lift the tailgate to the original position, and
then hook the latches.
Lifting and lowering the cargo bed
5
1. Cargo bed release lever
To lift
Pull up the cargo bed release lever on the left
or right side of the vehicle, and then slowly lift
up the cargo bed until it stops.
To lower
With hands and fingers clear of pinch points,
lower the cargo bed slowly to its original po-
sition and be sure it is locked into place.
WARNING! Keep hands, body, and other
people away from pinch points when low-
ering
cage/frame while closing the bed.
EBU31540
The front and rear shock absorber as-
semblies
EWB00411
1
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and
understand the following information be-
fore handling the shock absorber assem-
blies.
 Do not tamper with or attempt to open
the cylinder assemblies.
5-23
bed. Do not
WARNING
hold onto the
[EWB03260]