Haier BW1500W User Manual page 14

b Steps of using the operation buttons and description of each step.
BW1500W
Push the POWER ON/OFF button to switch on the power.
Push the PROGRAM button to select the suitable automatic program.
After switching on the power, the machine will set to standard program automatically. To select other program, push the
PROGRAM button till the corresponding indicator is on. Refer to the PROGRAM button in Page 11.
For an example: select quick wash for the quick washing of the laundries with light dirt.
Push PROCESS button to select suitable procedure
After switching on the power, the machine will set to WASH-RINSE-SPIN program automatically. That is the most
common program. To select other program, push the PROCESS button to select one or more procedures
among SOAK WASH RINSE SPIN .
Refer to the PROCESS SELECTION
Attention
Even there's no water in the tub, a certain period
is required before spin starting.
Do not use the SOAK program for the woolen
textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
WATER
PROCESS PROGRAM
RESERVE
START
LEVEL
PAUSE
METHOD for the selection.
POWER
ON/OFF
Page 11
Page 13
POWER
ON/OFF
PROGRAM
PROCESS